Confederate Rose

As was the case last week, this week's block on Barbara Brackman's Civil War Sampler, isn't really Inklingoable.
BUT, it is possible to fake and fudge your way through it.

Print the 2.5" QSTriangles as directed in the printing-table.
Note that you must use Layout 2 and must (!) use the size I have given. You will have a good deal of waste, but it cannot be helped if you want to use Inklingo as part of constructing the 'weird shape' you need.

From the fabric you have printed with the 2.5" QST, cut 4 squares, each with two adjacent QSTriangles.

Draw a new stitching-line, 0.25" from either of the two stitching-lines already on the two-triangle unit.
Cut another 0.25" away from the newly drafted stitching-line.
See the picture on the right. Red line is new stitching-line, green line is new cutting-line. If you have trouble seeing it, click on the picture to enlarge it.

Add these four 5-edged shapes to the 2.25" central square (cut 2.75")
Be careful NOT to stitch into the seam-allowances. Sew only from cross-hair to cross-hair (or the equivalent). That is the 'joy' of Y-seams or inset seams, but it is possible to do, even on the machine, even for me (!), but only if one does not sew into the seam-allowance but stops exactly at the corner.

Add the 1" (finished width) strips to the centre.
Strictly speaking, to make the relationship between the pieces exactly the same as is found in Brackman's block, you now need to cut the strips 1.4" for a finished width of 0.9". I have opted to make mine 1" finished (and printable with the 1" Log Cabin collection), and to print them 5" long. They need to be trimmed, BUT, if you print these, align the centre of each log with the centre seam on the 'messed with' shapes that border the centre square. That way, you can also align the 1.875" HST you need to add to the corners with the centres of both ... centre and strips, and can wait to trim until the block is actually finished.

For the 8" block, use Barbara Brackman's directions.
Printing table.

Star of the West

Week 35 of Barbara Brackman's Civil War Sampler is called 'Star of the West' ... or Clay's Choice ... or Harry's Star. It's an easy block to make, and looks good in many different versions.

The fabric values given in the printing table are based on the actual block shown on Brackman's blog, and not on the colour-values given in the drawing at the end of her post.

Brackman's Post here.
Printing Table here.

Rosebud

Week 34 of the Brackman sampler, and we're rolling in HSTriangles.
The 6" block is eminently Inklingoable
The 8" block is less so.

A few notes (on the 8" size) :
I have given the Inklingo-sizes that are equivalent to the sizes Brackman gives on her blog. However, please note, that since this block has 3 triangles spread over 4" of space, the size given by Brackman will give you a unit which is too small.

If you - like I - own just about every Inklingo collection known to woman, you can use other sizes. A better approximation to the sizes actually needed to make an accurate 8" block are :

• 1.32" HST in the 15" Feathered Star collection
• 2.64" HST in the 30" Feathered Star collection

The 1.32" HST equals Brackman's template A (where you need 12 of one fabric and 8 of another)
The 2.64" HST equals Brackman's template C (where you need 4)
And then you need the 4" HST

Brackman's post here.
Printing-table here.

Carolina Lily

This week's block on Barbara Brackman's Civil War Sampler is inspired by the Carolina Lily. The 'real' block has 3 lilies and some applique. This one only has one lily, placed in a 'vase'.

The block uses (mostly) the 6" LeMoyne star collection for the 6" size block. For the 8" size block, follow Brackman's directions, or make the 6" block, and then Log-cabin it, using the 1" Log Cabin collection, to make the 6" block into an 8" one.

I would hybrid-piece this one. Use the machine for most of the seams, but hand-stitch the inset seams between the petals of the lily, just as I would an ordinary / full LeMoyne star.

Brackman's post.
Printing-table.

Barbara Frietchie Star

Week 26 of Barbara Brackman's Civil War Sampler, and we're half-way through.
This one is as born for the Inklingo HST. Print a total of 16 HST same size of light / background-fabric, and you're rolling.

Linda Franz' Triangle Tips.
Scroll down a bit. It's the 'Inklingo Sawtooth' pdf-file you want to look at.
Brackman's Post
Printing Table

White House

Week 16 of Barbara Brackman's Civil War Sampler quilt is called White House.

In the printing-table, I'm giving you two different versions of the 6" block; one using striped fabrics, one where you piece the stripes, using the 0.5" Log Cabin collection.

If you choose the latter option, here's what you do :
With the Log Cabin rectangles, piece a total of 4 rectangles, each 1.5 x 3” finished size (that'll mean 2 x 3.5” unfinished).
Add the fabric 3 (or 4) HST to one (the same) side of each of these rectangles, to make the unit that in BB's directions are a combination of one unit each of A and B. Use the method shown in Linda's pdf on how to make Inklingo Snowballs. See her page of Triangle Tips and then scroll down a bit to find the pdf with 'Inklingo Snowballs'.

Brackman's directions.
Printing table

London Square

The block for week 11 of Barbara Brackman's Civil War Sampler Quilt is called London Square.
It is mostly Inklingoable in both the 6" and the 8" format.

The larger triangles are not Inklingoable. For the 6" format, and if you have CD 2, you can Inklingo them, but really, HST that size are not all that difficult to make the old-fashioned way :-)

Follow Brackman's directions for sewing the block.

Printing table. Updated June 1st, 2011

Birds in the Air

Week 9 of Barbara Brackman's Civil War Quilts Sampler is Birds in the Air

I've given printing directions for slightly more shapes than you need. Makes it easier to machine-piece that way.
Do not print the Focus 1 fabric, but layer it with your printed background-fabric and stitch from the BF-side.
If you hand-piece, print all (possible) fabrics.

The block isn't really Inklingoable in the 8" format, so you're on your own there, but it is eminently Inklingoable in the 6" format.

added on March 20
Took my own advice from another post (duh!), and went to Linda's wonderful page of Triangle Tips on inklingo.com.
Open the Triangle-tips page.
Scroll down.
Find a version of Birds in the Air that is eminently Inklingoable and how to make it.
To make things even better : Linda's version makes the 8" block inklingoable :-)
end of addition.


Do not print the Focus 1 HST. The size of fabric given in the printing-table is for layering with half of the printed Background Fabric HST

Machine-piecing : Make a total of 4 squares from background- and Focus 1 fabric. Discard one.
Join them as shown by Brackman.
Add the large, Focus 2 fabric HST.

Finished.

Link to Brackman's post and her directions.
Link to the printing table.

Kansas Trouble

Week 5 of Barbara Brackman's Civil War sampler quilt is Kansas Trouble
Please note that you only make a total of 16 squares out of the 0.75" (for the 6" block) or 1" HST (for the 8" block) The remaining 8 small HST are placed at the end of the unit/s.


Check how to make the Block at Barbara Brackman's 'Civil War Quilts' blog.


Direct link to the block.
Printing-table. Updated on May 23/2011

North, or Evening Star (again)

Barbara Brackman's Civil War Quilts sampler, block two is up.
That's easy :-) We've already done that here on the sampler-blog, but it was called Evening Star.
You can go there and check it out. The directions for making it as a 6" block are the same.

BUT, here are the printing tables. As for last week, the one for the 6" block is fully written up, the one for the 8" block, you need to calculate size of paper on your own.
Download printing-table here.

Remember the Inklingo Index of Shapes for checking what collection/s (if any) has the shape you seek, in what size/s.

Catch me if you can

A week late, but - hopefully - not a dollar short :-)
Barbara Brackman has a Civil War, block of the week, sampler-blog up. I am behind with everything ! so I hadn't noticed. Never-the-less, I would like to follow it, and - when possible - give the directions for Inklingo.
Ms. Brackmann makes 8" blocks, but I will - when possible - stick with the 6" format that has been the norm on this blog.

No pictures today, as I haven't (yet) have the time to actually make the block. I will. Eventually.
Brackman's first block is 'Catch me if you can'.

Find the printing-directions here.

For the 6" block you need :

Background fabric
12 HST, each 1.5"

Focus-fabric 1 (medium)
12 HST, each 1.5

Focus-fabric 2 (dark)
8 HST, each 1.5"

Making the block
Make the HST into squares
Background and focus-fabric 1 : 4 squares
Background and focus-fabric 2 : 8 squares
Focus-fabric 1 and 2 :4 squares

Lay the squares out to match the picture.
Join row-by-row.
Join the rows.
Press.
Finished !

To make an 8" block (like ms Brackman), us 2" units rather than 1.5" units.

Old Maid's Puzzle 5

This is probably the most horribly wonky block I have presented on this blog ! and I apologize. I am still not good enough freinds with my sewing-machine to be able to sew miniatures.

The block is BB 1317, which - when you join 4 of them - turns into BB # 1149. Both called Old Maid's Puzzle.

6" block :

Background Fabric
0.75" HST : 40
0.75" Square : 16

Focus Fabric
0.75" HST : 24
1.5" HST : 8

I used two different focus-fabrics, one for the smaller HST and one for the larger, but you can easily make it with just one Focus Fabric
The Printing Plan has printing-directions for both a 6" and a 12" block.

Start by making 24 HST-squares

Press the seam-allowance to the background-fabric !!! (yes, I know, but it makes for an easier journey further down the road)

Add a HSTriangle to each side of 8 of the HST-squares forming a larger, composite, HSTriangle
Add the larger, composite, HST to each of the 8 larger printed HST


Make 4-patches from the remaining HST-squares and the un-pieced squares

Join the squares to form a block

What you have now, is BB # 1317

Make four of these (and that's what the printing-plan aims at), and join them to make BB # 1149

And this is where you can see how seriously wonky the block is. No matter :-) It will go into my finished Inklingo Sampler quilt, and will work well there, giving joy to me as part of the pattern, and joy to any quilt-police-person who will have her/his day brightened considerably by dint of enabling her / him to point out the un-pointy points, the um-mathing seams and the sheer ... wonkiness of it :-) S/He will have a field day :-)

Magazines !

This week there is no single block, but a reference to one of the Magazines to which I subscribe. I have just received the most recent issue of Fons and Porter's Love of Quilting and there are several great quilts that are eminently Inklingoable ! I am only going to give the sizes of shapes that you need. If you want the pattern, buy the magazine :-)

IF you want to make any of the quilts, I can recommend that you download Monkey's Cheat Sheet and use it to note down all the sizes and shapes that you are going to need, AND fill it out with the relevant shape and size of Inklingo template.

... and PLEASE note that this magazine usually makes HST by using full squares ! This is not necessary with Inklingo. You can see pictures of most of them at the Fons and Porter home-page, because they have kits for most of these quilts


Watermelon & ShooFly (p. 18 ff)
Make the ShooFly blocks with 2" HST in Collection 2 or the downloadable HST 00B collection, and 2" squares found in MANY collections. Check the Index of Shapes on the Inklingo page.

Cottage in May (p. 43 ff).
Instead of cutting 2.5" squares for quick corners, print 2" HST with Collection 2 or the downloadable HST 00B collection.
Instead of cutting 3.5" squares for quick corners, print 3" HST with Collection 2 or the downloadable HST 00B collection.

Kinkame (p. 52 ff)
This quilt can ALL be made with the shapes in Collection 3. The triangles used are 0.75", 1.5" and 2.25". All found in Collection 3. Remember that the Inklingo-size is the finished size of the shape.

Cambridge Stars (p.72 ff)
The basic unit is 2.25". So print 2.25", and 4.5" HST and cut (free-hand), 2.25" (finished size) squares. The smaller HST is in the downloadable collection, both sizes are in Collection 2.

Elizabeth's Garden (p. 80 ff)
The following can be printed :
3" HST (triangle A), 1" squares (for the centre 9-patches) Again the downloadable HST 00B collection, and MANY other collections. Check the Index of Shapes at the Inklingo home-page

Variable Star (p. 86 ff)
Is made with 6" (finished size) Variable Star blocks. These blocks have already been shown on this blog, under the name of Evening Star.

Meadow Brook (p. 92 ff)
Uses 3" HST from either Collection 2 or the downloadable HST 00B collection, and 3" squares from either the Drunkard's Path collection or the 9" Storm At Sea collection

Grandmother's Daisy Garden (p. 100 ff)
I think this one is meant to be simple, using Paper-Piecing and the cutting of 60-degree angles. I think I would rather just make the hexagon flowers using the 1.5" hexagons in Collection 3, and "rectangle" them up.

Old Maid's Puzzle 4

This block is 10.5" square. Much larger than the 6" that is the most common format on this blog, and it uses both the Drunkard's Path collection and Collection 2.
If you do not have Collection 2, most of the triangles can be made with the HST 00B collection, but you will need to make the large HST by hand.

Barbara Brackman : ”Encyclopedia of Pieced Quilt Patterns” #2225
Jinny Beyer : ”The Quilter's Album of Patchwork Patterns” p. 329-12 (sort-of)

Download Printing-table here.

Background fabric
28 HST, 1"
4 (unprinted) rectangles, each 1 x 2.25" finished size (cut size : 1.5 x 2.75")

Focus fabric 1 (dark)
4 HST, 4.25"
28 HST, 1"
1 Drunkard's Path centre-unit (shape C, from the Drunkard's Path collection)

Focus fabric 2 (medium)
4 quarter-circles (from the Drunkard's Path collection)

Making the block

Start by making the centre-square, joining the 4 quarter-circles to each side of the DP centre-shape.

Add the 4.25" HST to the sides.
IF you have printed the 4.25" HST from Collection 2, make sure that the centre matchpoints ... match.
Join a triangle to two opposite sides.
Press
Add a triangle to the remaining two sides.
Press
If you have printed the 4.25" HST (rather than hand-prepare them), your square will now be slightly larger than the block requires, so trim down your centre to 8.25".

Make the HST squares. If you are uncertain on how to, check out Linda Franz's Triangle tips.

Lay out the block, with the 1" HST around the centre.
Join the 1" HST into 4 strips of 3 units, and 4 strips of 4 units.

Make sure they are placed right in relation to each other and to the centre of the block. This is facilitated by your laying out the block as it should look in the end.

Join a 3-unit set to each side of two of the 1 x 2.5" rectangles
Join a 4-unit set to each side of the two remaining 1 x 2.5" rectangles

Join the two shorter strips to the centre.

Add the remaining, longer, strips to the centre.

Finished !

Old Maid's Puzzle 3

BB # 1913

Block finishes at 5.25"

Download printing-table here.

Background Fabric
24 HST, 0.75"

Focus Fabric 1 (medium-light)
4 rectangles, each 0.75 x 2.25" finished size

Focus Fabric 2 (dark-medium)
12 HST, 0.75"
1 square, 0.75"
4 HST, 2.25"


Making the block

Make 12 HST-squares, using BF and FF2

Add a Background-fabric HST to 8 of the squares (see picture, left). Take care to add it to the right side of the HST-squares.

Make 4 units, where you add another background-fabric HST to the other side of the square-with-triangle unit.

Make 4 units, where you add a HST-square to the top of a square-with-triangle unit.

Join the two units to make a new triangle, composed of a total of 6 background-fabric triangles and 3 focus-fabric triangles.

Join each of the pieced triangles to one of the focus-fabric, 2.25" HST, making 4 squares, each 2.25"

Lay out your block, with the rectangles and the centre square.

Add a pieced square to each side of two of the rectangles, and add a rectangle to each side of the small square of focus-fabric, making 3 "strips".

Join the strips.

Finished !

This block finishes at 5.25" square. If you want it to go with the 6" blocks, log-cabin it.
Cut 2 strips that are 1 x 5.75", and join them to two opposite sides of the block. (if you are a marvel at precision-piecing, the strips need only be 0.825" or 7/8" wide, but .... I'm not that confident, so I cut it bigger, and chop off what is not needed in the end)
Then cut two strips that are 1 x 6.75" and join to the remaining two sides.
Trim down to 6".

Old Maid's Puzzle 2

Barbara Brackmann # 1314a
Jinny Beyer # 73-10











Download printing-table here.

Background-fabric
4 squares, each 1.5"
4 HST, each 1.5"
2 HST, each 3"

Focus-fabric
4 HST, each 1.5"
2 HST, each 3"

Making the block :


Make 4 HST-squares, each 1.5"

Make 2 HST, each 3"

Make two identical 4-patches, using the 1.5" HST-squares and two 1.5" squares

Lay out the block as a 4-patch

Join the 4-patch, and you are finished !

Old Maid's Puzzle 1

There are many blocks with the name "Old Maid's Puzzle", and the next few blocks will be some of the blocks thus named.
This block is BB # 3220 and JB 75-12. It can be made with Inklingo, exactly as it is shown in both collections, however, for ease of making it, I have added a few seam-lines.

Print-table in pdf.format here.

Background-fabric
1 square (unprinted) 4.25"
2 QST, each 3"
4 HST, each 1.5"

Focus-fabric
12 HST, each 1.5"
2 QST, each 3"


Make 4 HST-squares, each 1.5"
Make the centre 3" QST square
Make 4 Flying Geese units, using the fast, no-waste method from Linda Franz's Inklingo homepage (here)

Lay out the block. It is a basic 9-patch once the units are joined, but make sure they turn the right way in relation to each other.

Make two units, each with a Flying Goose, and a 1.5" HST-square on either side of it.
Make one unit of the 3" QST-square, with a Flying Goose on each side of it.
Join the 3 strips
Finished

Wild Goose Chase

Barbara Brackmann # 2905a; Jinny Beyer 165-7

This is probably the block that most people associate with the name "Wild Goose Chase".
Uses either Collection 2 OR the downloadable HST 00B and QST 00B collections. If you do not have Collection 2, but "only" the downloadable collections, you need to make the large QST the old-fashioned way.
If you have the POTC / Inklingo Lite 4 collection, that comes in useful too.

Fabric-printing table here (click the link, and download a pdf-file)

IF you are iffy about downloading from box.net, download Monkey's Cheat Sheet from Linda Franz's page, and fill in the appropriate bits yourself.

Fabric 1 (background)
1 square, 1.41"
16 HST, 1"

Fabric 2 (focus 1, medium)
4 QST, 4"

Fabric 3 (focus 2, dark)
4 HST 1"
32 QST 1"

Since the Geese in this block finishes at 0.705 x 1.41", and are on the diagonal, you need to make them the old-fashioned way, rather than Linda's Fast method. The good thing is, that by using the HST and QST required, you will have straight-on-grain the right way, and you will not need to mess around with measurements like 0.705" :-)

Making the block

Make 16 Flying Geese the old-fashioned way, adding two dark, 1" QST to each of the background-fabric 1" HST.

Make 4 strips, each consisting of 4 Flying Geese.

Add a dark fabric, 1" HST to the background-fabric end of each of the strips.

Lay out the block.

Make two units, each consisting of one strip, flanked by two 4" QST, so the dark end of the strip forms the corner.

Make one unit with the square, flanked by two strips.

Join the 3 units.

Finished !

Northumberland Star

Barbara Brackmann # 2201 b : "Northumberland Star or Eight-pointed Star"

When blocks have Flying Geese on the diagonal, and you want them to finish at a certain size (e.g. the 6" that this blog aims towards), it isn't possible to make the geese the fast way that has been used in the previous blocks.
The Flying Geese in this block measure 1.06 x 2.12". This - happily - coincides with the diagonal measurments on the 1.5" HST (2.12" on the diagonal) and 1.5" QST (1.06" on the diagonal).


Fabric-requirements

Fabric 1 (Background / Light)
4 HST, 3"
5" square

4 squares. 1.5" - not printable
4" square (cut each square 2")

4 HST, 1.5"
3 x 5.25"

Fabric 2 (medium)
2.12" square
Either cut 2 5/8" (2.625") or use the diagonal of the 1.5" HST for "ruler"

Fabric 3 (dark)
16 HST, 1.5"
5.75" square

Making the block :
When making the component parts of this block, be careful. You have bias all over the place, but that is so you can have the grain the right way in most of the pieces of the block once it is finished.

Make 4 Flying Geese the old-fashioned way, using one 1.5" HST of background-fabric, with two 1.5" QST

Join two 1.5" QST to two adjacent sides of each of the four background-fabric squares.

Join a Flying Goose to each of the square-with-QSTriangles units

Lay out the block

Join a 3" QST to each side of two of the Flying Geese units.

Join a Flying Goose unit to two opposite sides of the fabric-2 square

Join the three units

Finished !

Chain and Bar

Barbara Brackmann # 1961

Uses Collection 2 or the downloadable Inklingo HST 00B collection

Fabric 1 (background)
4 HST, each 2.25"
3.75 x 6.75"

16 HST, each 0.75"
3.75 x 5.25"

Fabric 2 (focus)

3.75 x 6.75, to layer with same size Fabric 1

Two squares, each 2.75" to make a total of 8 Flying Geese

Two rectangles, each 2 x 2.75"



Make a total of 4 squares, using the printed 2.25" HST background-fabric, layered with the same size Focus-fabric.

Make a total of 8 Flying Geese, using Linda's method of making no-waste Flying Geese.

Make two strips of Flying Geese, each with 4 geese "flying" in the same direction.
Join the two strips, points meeting.
Make the two outside strips, each consisting of ; HST-square, rectangle, HST-square
Make sure that the HST-squares are mirror-imaging each other around the rectangle.

Join the 3 strips.

Finished !