Friday, November 27, 2009

Washington Star

Could be State of, could be George, could be DC. You choose.

QST for this one ! and some Flying Geese :-)

Uses Collection 2

Since this block deals with quite small units, it makes the most sense to me to make not two flying geese in each colourway, but 4, and discard the two surplus. Likewise, it makes most sense to make 6 QST-squares, and discard one.
This is therefore, what the directions are made for.

Fabric 1 (background)
4 squares, each 1.5" (cut 2")
8 rectangles, each 0.75 x 1.5" (cut 1.25 x 2")
10 QST, 1.5" (p. 102)
3.5 x 9.25" (prints 12)
20 HST, 0.75" (p. 60)
5.75 x 7.5" (prints 24)

Fabric 2 (focus A)
10 QST, 1.5" (p. 102)
3.5 x 9.25" (do not print, but layer with the printed background-fabric)
1 square, 2.75" for 2 flying geese units (makes 4, but 2 are discarded)
Fabric 3 (focus B)
1 square, 2.75" for 2 flying geese units (makes 4, but 2 are discarded)
4 HST, 0.75" (p. 60)
2 x 3.5" (do not print, but layer with the printed background-fabric)

Make a total of 5 QST in Fabrics 1 and 2

see Linda's Triangle Tips on Flying Geese
Make the Flying Geese units with Fabrics 1 and 2
Make the Flying Geese units with Fabrics 1 and 3

Lay out the block as shown in picture on the right.
(click on picture if you have trouble seeing the individual units)

Join to form 5 rows, as shown in picture on the left.

Join rows

Finished !

Tuesday, November 24, 2009

Bonus-block - Spools


This month the square bonus-block is not made with the free collection or the LeMoyne star collection, but with Inklingo Lite # 4, the one you use if you are making your own version of Lucy Boston's Patchwork of the Crosses.

The block finishes smaller than 6", (actually, it finishes at the weird size of 4.82") but you can log-cabin it, and make it fit with the other 6" blocks.

Also, if you print the 1" squares for this block, you will waste some. You can get around that, by cutting squares, each 1.5". They will then finish at the 1" you need for this block.

As you can see, I have used scraps for centres, and have not coordinated the centre ("thread") part of the spools with the end of them. This is perfectly good with this pattern ... after all, spool-ends and colour of thread are rarely identical :-)


Fabric 1 (background)
8 Long half-hexagons (p. 48)
5.25 x 6"

2 strips, each 1.25 x 5.5" (for log-cabining the block, to make it 6")
2 strips, each 1.25 x 6.5" (for log-cabining the block, to make it 6")

Fabric 2 (Focus A)
4 Long half-hexagons (p. 48)
3 x 6"
4 squares, 1" (p. 28)
3.5 x 5"

Fabric 3 (Focus B)
4 Long half-hexagons (p. 48)
3 x 6"
4 squares, 1" (p. 28)
3.5 x 5"

Join a long half-hexagon of the same fabric to opposite sides of each square.

Inset a background-fabric half-hexagon to each of the remaining sides

Make a total of 4 spools

Arrange as a 4-patch

Join the squares as you would a 4-patch.

Log-cabining it : The shorter strips are longer than the block is. Just sew one on each side of the block, and then cut off the (small) excess.
Add the two longer strips to the remaining two sides.
Trim it down to 6.5". This is the unfinished size. It will finish at 6" when it goes into the quilt.

This is a great way to use your smallish scraps, and if you - like me - are slightly addicted to old quilts and pictures thereof, you can probably find at least one picture of an antique quilt, made from scraps.

Friday, November 20, 2009

Balkan Puzzle / Whirlpool


After all those HRT, time to sink into the (relative) comfort of a block made solely with HST.

Block finishes at 6"

Uses Collection 2

Fabric 1 (background)
16 HST, 1.5" (p. 66)
5.5 x 10.5"

Fabric 2 (focus A)
8 HST, 1.5" (p. 66)
Cut a piece 5.5" square to layer with the printed Fabric 1 (machine-piecing)
OR print a sheet the same size (hand-piecing).

Fabric 3 (focus B)
8 HST, 1.5" (p. 66)
Cut a piece 5.5" square to layer with the printed Fabric 1(machine-piecing)
OR print a sheet the same size (hand-piecing).

Cut Fabric 1 (background-fabric) into two halves

With Fabric 1 and 2 : make 8 squares. Press 4 of those towards the background-fabric, and 4 towards the focus-fabric. Yes. This is really necessary if you want to have a fighting-chance to make this block lie flat in the end. If you hand-piece, it isn't an issue, but if you machine-piece, it is.

With Fabric 2 and 3 : make another 8 squares. Again, press 4 of those towards the background-fabric, and 4 towards the focus-fabric.

Arrange as shown in picture (left).

Make 4 identical 3" squares (OR join rows)

Join the 4 squares (OR join the 4 rows).

Finished

Monday, November 16, 2009

Hexagon bonus block # 9


"Diamond Cube"
Finished size : 3" to the side.
Uses Collection 1

Fabric 1 (background / outside pieces)
6 diamonds, 1" (p. 55)
3.5 x 6" (printed landscape
Fabric 2 (light)
7 diamonds, 1" (p. 55)
3.5 x 7.5"

Fabric 3 (medium)
7 diamonds, 1" (p. 55)
3.5 x 7.5"
Fabric 4 (dark)
7 diamonds, 1" (p. 55)
3.5 x 7.5"


Even though it doesn't much look like it, this block is really a Hexagon-flower with an Attitude.
There are basically two ways to make it.

Make 7 hexagon-shaped blocks, each from one light, one medium and one dark diamond. Make sure the values are placed the same way in each of the blocks.

After having done this, you can make it as you would a Hexagon-Flower block (Cathi's Tutorial is right here)

The other option is to do it in strips, laying out your pieces like shown on the picture.
I would then machine-piece the dark-and-medium-(and-background)-fabric) "strips", and hand-piece in the light fabric diamonds afterwards


Barbara Brackman's "Encyclopedia of Pieced Quilt Patterns" #240

Friday, November 13, 2009

President Carter

Another HRT-block, this one a presidential one.

Uses Collection 2

Fabric 1 (background)

4 HRT (p. 132), 1 x 2"
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape

4 HRT (p. 132), 1 x 2", printed mirror image (!!)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

2 QST (p. 106), 2" finished
(the only smart thing here, is to print 4 and hope there will be a use for the remaining 2, somewhere along the line)
4" square


Fabric 2 (focus a)
4 HRT (p. 132), 1 x 2"
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape

4 HRT (p. 132), 1 x 2", printed mirror image (!!)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

2 QST (p. 106), 2" finished
(the only smart thing here, is to print 4 and hope there will be a use for the remaining 2, somewhere along the line)
4" square

Fabric 3 (focus b)
4 squares, 2" (p. 59 of collection 1)
OR cut 4 squares, each 2.5"

Make the centre QST square. (see Linda's Triangle Tips)

Make star-point units as you did the previous blocks BUT, join them differently, ensuring that light goes together with dark.

Lay out, and join as a 9-patch

Finished


Brackmann # 1721

Friday, November 6, 2009

54-40 or Fight



Another 8-pointed star block, but this one with an attitude, viz the 4-patches tucked into the medley.








Fabric 1 (background)
4 HRT, 1 x 2" (Collection 2, p. 132)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

4 HRT, 1 x 2" (Collection 2, p. 132, print mirror-image !)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

10 squares, 1" (Collection 1, p. 58 OR the POTC p. 28)
3.75 x 8.5
Or cut 10 squares, each 1.5"

Fabric 2 (focus 1)
4 HRT, 1 x 2" (Collection 2, p. 132)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

4 HRT, 1 x 2" (Collection 2, p. 132, print mirror-image !)
2.5 x 6" (portrait) OR
3.25 x 4.5 (landscape)

Fabric 3 (focus 2)
10 squares, 1" (Collection 1, p. 58 OR the POTC p. 28)
3.75 x 8.5
Or cut 10 squares, each 1.5"

Make the five 4-patches first:

You can strip-piece the 4-patches (picture on the left), or cut apart all the squares, and then join them.

Make sure that all your 4-patches twirl in the same direction. This is important for when you join the star (see picture below)
You can ensure this, by pressing to the dark the first time, and then, when joining the 2-square units to each other, make sure that they turn the same way as you put them through the machine (e.g. light through the machine first)
Make and set aside.

Star-points :
Make the star-points as you did the previous block.

Joining it all.

I rarely show pictures of the back, but here it is sort-of important. Make certain that the central seam on the star-point units turn "the other way" compared to the seams on the 4-patch. You will want that to be the case, because you can then twirl the seams where an awful lot of bits meet, rather than have big lumps of material that is impossible to iron flat.
See picture on the right.

Lay out and join as you would a 9-patch.

Press and you're finished !

Brackmann # 1624

Sunday, November 1, 2009

Hexagon bonus block # 8

Spiderweb ... well ... it is Halloween tomorrow :-)

Uses Collection # 1

Finished size is 3" to the side

Fabric 1
3 half elongated hexagons (p. 45), 4.75 x 5"
3 half hexagons, 1" (p. 26), 3.5 x 4.5" (printed landscape
3 triangles, 1" (p. 52), 4 x 5" (yields 6 triangles)

Fabric 2
3 half elongated hexagons (p. 45), 4.75 x 5"
3 half hexagons, 1" (p. 26), 3.5 x 4.5" (printed landscape
3 triangles, 1" (p. 52), 4 x 5" (yields 6 triangles)


This is one of the few hexagon-blocks that is easy to machine-piece, so hand- or machine is the same. Whatever feels the more comfortable to you.

Print and cut apart shapes.

Start by making 3 triangle-units in each of the two colourways, as shown on picture to the left, making each triangle striped.
Press to the dark

Join the triangles, alternating light and dark, into two half-hexagons, each with 3 triangles, like the picture on the right.
Press, so the seams all lie open.

Join the two half-hexagons to finish the spider-web.
Now, this final pressing involves you having to turn some of the seams on the centre triangles. There is no way one can make triangles press beautifully and perfectly, so there will have to be some turned seams in there.

Friday, October 30, 2009

Eight-pointed Star

This block uses Collection # 2
Finished size of block is 6"
More HRT, this time, with reverse printing. For tips and tricks on how to print shapes in the reverse, see here (link to Linda's blog)

Fabric 1 (background)
4 squares, (p. 59 of collection 1 or p. 52 of the POTC collection), 2" (or cut 2.5")
5.75" square

4 HRT (p. 132), 1 x 2"
2.5 x 6" (printed portrait)
OR 3.25 x 4.5", (printed landscape)

4 HRT (p. 132), 1 x 2", printed reverse (!)
2.5 x 6" (printed portrait)
OR 3.25 x 4.5", (printed landscape)

Fabric 2 (focus)
1 square, (p. 59 of collection 1 or p. 52 of the POTC collection), 2" (or cut 2.5")

4 HRT (p. 132), 1 x 2"
2.5 x 6" (printed portrait)
OR 3.25 x 4.5", (printed landscape)

4 HRT (p. 132), 1 x 2", printed reverse (!)
2.5 x 6" (printed portrait)
OR 3.25 x 4.5", (printed landscape)

Print your HRT both the reverse and the "straight" version, and your squares (if you are not just cutting them).

Keep the reversed and the straight HRTriangles separate for now.
Cut apart.
Trim the long end of each HRTriangle on the line provided.
Make 4 sets of Rectangles, using one focus- and one background-fabric HRTriangle for each.
Make 4 sets of reversed Rectangles, using one focus- and one background-fabric HRTriangle for each.

Make 4 squares, each being made up of one reversed and one straight rectangle

Lay out your block.

Join as you would a 9-patch.

Finished.

Sunday, October 25, 2009

Halloween Coasters - The Bat


Here's a fun, fast and cute little non-square block to make into Halloween coasters.

Uses Collection 2 and (if you want to print squares and rectangles as well) the POTC-collection or collection 1.

Finished size of coaster : 5 x 6"

Barbara Brackmann # 217.5

Focus (bat)
One 6.25" square
Two 1" squares (cut 1.5")


Background
7.25 x 7.5" (for printing), Collection 2, p. 74
4 rectangles, each 1 x 2" (cut 1.5 x 2.5") OR print from the Lucy Boston / POTC collection, p. 68
3.5 x 5.75"

Batting
Two scraps, each 5.5 x 6"

Backing
Two scraps, each 6 x 6.5"

Make two units of rectangle-square-rectangle (picture)
Make 4 Flying Geese, using the method described in Collection 2, p. 34-35, or in the Triangle Tips p. 10-11

Join the units as shown in the picture

Repeat.

Cut the two scraps you have picked for backing, down the middle, making each into two rectancles, 3 x 6.5".

Using the basting-stitch on your sewing-machine, piece them back together again.

Press to one side.

Layer your bits as shown on the picture : Backing and Block with right sides together. The batting on top of the pieced square. Yes. This is important. You need to have the seam on the backing accessible, because next step is :

Unpick the basting-stitch you used to join the two halves of your backing.

Turn.

Hand-stitch closed ... and that is fairly easy, because you pressed the seams on the backing, so they have a nice crease on one side.

Quilt if / as desired.

Repeat for the other one.

Finished !

Friday, October 23, 2009

Rectangle Pinwheel

Are you ready to break into Rectangles and HRT (Half Rectangle Triangles) ?
This is a very simple block, shown on p. 52 of Collection 2, but I've been unable to find it anywhere in Brackman's Encyclopedia, so ... let's just call it "Rectangle Pinwheel.
Uses Collection # 2.

Fabric 1 (background)
4 rectangles, 1.5 x 3" (cut 2 x 3.5")
8 x 3.5" or 4 x 7"

4 HRT, (p. 134), 1.5 x 3"
3.25 x 8.5"

Fabric 2 (focus)
4 HRT, (p. 134), 1.5 x 3"
3.25 x 8.5"

Print and cut apart the HRT.
Cut away the points along the printed lines.
Layer one focus-fabric and one background-fabric HRT
Join on the long, diagonal seam.
Do this a total of 4 times.
Press.

Join a background-fabric rectangle to each HRT-rectangle, on the focus-fabric side.

Lay out as a 4-patch, and join as a 4-patch.

Finished

Friday, October 16, 2009

Hexagon bonus block # 7

Triangles Galore
Size of block : 3" finished side

Uses Collection # 3

Fabric 1 (background)
12 triangles, 1.5" (p. 143)
5.75" square

Fabric 2 (focus)
12 triangles, 1.5" (p. 143)
5.75" square

Print and cut apart

Make 3 triangles of each colourway.

Join the triangles, alternating the colourways.

Finish.

Garden of Eden

or Economy Patch

This block finishes at 5". Check here (link to the Cake Stand block, published September 4th), what measurements to cut strips, in order to make it into a 6" block

This block can be made exclusively with pieces from the Lucy Boston / Inklingo Lite # 4 collection. You can also make it with Collection # 2 and some old-fashioned cutting of squares and rectangles :-), or, if the cutting of squares scares you, use Collection # 1 to print those.

Using the POTC collection

Fabric 1 (background)
4 rectangles, (p. 68), 1 x 2"
3.5 x 5.75"
4 squares, (p. 54) 1.41"
4.25 x 4.5"

Fabric 2 (focus A)
1 square, 1" (cut 1.5")
... don't bother to print this one, just cut it out, 1.5"
16 HST, (p. 58), 1"
5 x 6.75"

Using collection 1 and 2

Fabric 1 (background)
4 rectangles, 1 x 2" (cut 1.5 x 2.5")
4 squares, (Collection 1, p. 59) 2" (or cut 2.5")
5.75" square

Fabric 2 (focus A)
16 HST (Collection 2, p. 62), 1"
4.5 x 8.5"
1 square, 1"
... don't bother to print this one, just cut it out, 1.5"

The way to make the Economy-patches that go on each corner of the finished block is different for the two collections.

2" Economy-patches using the POTC-collection
Join a triangle to each of two opposite sides of each 1.41" square.

Press.

Join a triangle to the remaining two opposite sides of the 1.41" square.

Press.

Repeat, until you have 4 economy patches.


2" Economy-patches using Collection 2 (and 1)
Lay out a 1" triangle on opposite corners of a 2" square, as you did when making the X-quisite block.

If you have printed the 2" squares, you can use the match-mark on the side as a guide for placing your triangle.

Join, trim and press.

Add a 1" triangle to each of the remaining two opposite sides of the 2" square.

Press.

Repeat, until you have 4 economy patches.

Making the rest of the block, is the same, disregarding which collection you have used to prepare your patches.

Take a rectangle, and add an economy patch to each side of it. Do this twice.
Make a long strip, adding the two remaining rectangles to each side of the 1" square.

Add the three strips, so the slim strip is between the two strips with economy patches.

Finished.

If you know of patterns or books that uses this block in this size, please let me know, and I'll make links to each of the ones I'm aware of. miz_pal (at) hotmail (dot) com.

Barbara Brackman's "Encyclopedia of Pieced Quilt Patterns" # 1873 (5")

Friday, October 9, 2009

X-quisite

This is an all-over pattern, that can be made with any size square and any size HST, just remember, that the finished size of the HST (the size given in Inklingo) should be half the finished side of the square used.

Elly made the sample on the right.

Uses Collection # 2.

I have chosen to make it with four sections / as a 16-patch, but any size goes fine.

Fabric 1 (background)
16 squares, each 1.5" (cut 2")

Focus-fabric
32 HST, (p. 60) 0.75"

3.75 x 5.75" in two fabrics that are not the ones you used to make the BowTie block. With the left-over HST from last weeks block, you will have the 32 you need.

Print and cut apart.

Make all the square units, adding a HST to opposite corners of each square. Please note, that you are only adding triangles to two out of four corners.

Trim the excess from the squares.

Press towards the corners.

Join the squares in strips, each with 4 squares, and with the triangle-corners all facing the same way.

Make a total of 4 strips.

Join the strips.

Finished.

If you know of patterns or books that uses this block in this size, please let me know, and I'll make links to each of the ones I'm aware of. miz_pal (at) hotmail (dot) com.

Barbara Brackman's "Encyclopedia of Pieced Quilt Patterns" # 3250

Friday, October 2, 2009

BowTie


This is another way of using the HST in Collection # 2.

Block on the right is Elly's version of the Bow Tie.

Check Linda's Triangle Tips, p. 14-15 on how to make "fast corners" with Inklingo.

OR check Linda's short video on the same subject, found on her All About Inklingo blog.

Fabric 1 (background)
8 squares, each 1.5" (cut 2")
4 x 8"

Fabric 2 (focus A)
4 squares, each 1.5" (cut 2")
4 x 4"
4 HST, (p. 60) 0.75"
3.75 x 3.75", or 3.75 x the smallest lenght your printer will print (this will yield at the least 8 HST, but do not worry about the 4 HST you will have left over, save them for next weeks block)

Fabric 3 (focus B)
4 squares, each 1.5" (cut 2")
4 x 4"
4 HST, (p. 60) 0.75"
3.75 x 3.75", or 3.75 x the smallest lenght your printer will print (this will yield, at the least 8 HST, but do not worry about the 4 HST you will have left over, save them for next weeks block)

Cut the squares, print the HST, and cut 4 HST from each focus-fabric.
When using HST to corner a square, it is very important to trim off the points on the lines provided in the program. You need the un-pointy points in order to be able to align the triangle to the square.

Add a triangle to one corner of each of the 8 background-fabric squares.
Trim off the excess.
Press.

Join each of your pieced units to a focus-fabric square. Make sure that you join the right "cornered squares" to the right focus-fabric squares. They should all be joined along the same edge, making four identical sets of each focus-fabric.

Press, and check that you have them turning all the same way, relative to each other.

Join the sets in pairs, making a total of 4 BowTie blocks, two from each colour.

Join the BowTies as you please, the mock-ups below, are the options that are, apart from the one I have chosen ... and if you make a full quilt out of it, doll- or person sized, these two turn out the same in an all-over.

If you know of other patterns or books that uses this block in this size, please let me know, and I'll make links to each of the ones I'm aware of. miz_pal (at) hotmail (dot) com



Barbara Brackman's "Encyclopedia of Pieced Quilt Patterns" # 3608

Thursday, October 1, 2009

Hexagon bonus block # 6

Texas Star

Finished size of block : 3" to the side.
Uses Collection # 3

The version on the right is made by Linda, and she has added half-triangles as a setting, from the Inklingo KISS 101 collection.

Fabric 1 (background)
6 diamonds (p. 122), 1.5"
5.5 x 6.25"

Fabric 2 (focus A)
6 starpoints, (p. 97), o.75"
5 x 6"

Fabric 3 (focus B)
1 hexagon (p. 82), 0.75"
Small scrap, or smallest piece that priter will accept. With my printer, that is 3 x 5", which will yield 2 hexagons.

Another nice, traditional hexagon-block. It is basically a hexagon-flower with an attitude, and like the hexagon flower, it can be hybrid pieced, or you can use Cathi's tutorial.

Start by making the star.
The arrows on the picture on the left shows how I pieced mine.

First the green arrows, adding 3 starpoints to the centre hexagon
Second the orange arrows, inserting the remaining 3 starpoints into the mix, and finishing the star.
Finally the red arrows for the outside diamonds. They can be added with one, continuous thread.

























This block can be made in a version that is 4" to the side, if you use the 1" Starpoints and hexagon from Collection 1, and the 2" diamond from the KISS collection102.

Friday, September 25, 2009

Double T

Uses Collection # 2.

This block is one that I had to make. My first name starts with a T as does that of my DH. Very important block :-)

Martha's block on top, Elly's block below.



Use the Flying Geese method, found on p. 10-11 of the Triangle Tips.


Fabric 1 (background)
Two 3.25" squares for the Geese
3.5 x 6.75 for printing 2" HST
One 2.5" square

Fabric 2 (focus)
4.5 x 8.5" for printing 1" HST
3.5 x 6.75 for layering with the BF 2" HST


From p. 62 of Collection # 2, pick the ink-colour that will work best with your fabric.
Cut a 4.5 x 8.5" piece of fabric and same size of freezer-paper.
Iron freezer-paper to the front / right side of the fabric.
Print 16 HST with a finished (square) side at 1"

From page 70 of Collection # 2, pick the ink-colour that will work best with your fabric.
Cut a 3.5 x 6.75" piece of fabric and same size of freezer-paper.
Iron freezer-paper to the front / right side of the fabric.
Print 4 HST with a finished (square) side at 2"
Press those towards the background-fabric.


Layer the two fabrics that are each 3.5 x 6.75", right sides together.
Sew on the diagonal (dotted) lines.
Cut on all the straight (whole) lines.

Iron your HST to the light / background-fabric.

Make 8 Flying Geese, usingLinda's directions in the the Triangle Tips file, p.10-11. You will use the two 3.25" squares of Background fabric and the 16 1" HST for this.

Join the Geese in pairs, so they fly the same way.
Lay out the (now) 9 bits, to form the block
Join as you would a 9-patch.

OR, you could go to town, and make the T's in two different colours. There's a bit more printing involved here, but Linda's method of making Flying Geese actually works well for this one.

Two-colour version.

Fabric 1 (background)
Two 3.25" squares for the Geese
3.5 x 6.75 for printing 2" HST
One 2.5" square

Fabric 2 (focus A)
4.5" square for printing 1" HST
3.5" square for layering with the BF 2" HST

Fabric 3 (focus B)
4.5" square for printing 1" HST
3.5" square for layering with the BF 2" HST

Start making the flying geese exactly as directed, using the same fabric HST to make the first part.
When they are cut apart, and have been pressed, use HSTs from the other focus-fabric to make the second round.

This will give you Geese with two different colours of corners, and they will be mirror image. This is as it should be.

Lay out Geese, that have same focus-fabric to the same side, and join them in pairs, making sure the Geese turn the same way.

Lay out your block.
Join as you would a 9-patch.

Press.
Finished !

If you know of patterns or books that uses this block in this size, please let me know, and I'll make links to each of the ones I'm aware of. miz_pal (at) hotmail (dot) com.

Barbara Brackman's "Encyclopedia of Pieced Quilt Patterns" # 1662a

And here's an interesting story about the Double-T block, that Dorothy shared (and thank you for that, Dorothy) :

You may know that before women had the vote in the US, many expressed their political beliefs through their quilts. Blocks like Tippecanoe, Whig Rose, 54-40 or Fight, etc. all expressed the quilter's views on issues of the day. The T-block has the same significance.
In the mid 19th century, a huge reaction to the ubiquity of liquor in American life arose. The Temperance movement grew, and the T in this block stands for Temperance.
Eventually women in the US won the right to vote, and shortly after that, Prohibition (the Constitutional amendment outlawing the sale of liquor) became law.